PX815-3-L0 Firmware upgrade
ver.
1.07

Firmware upgrade for 3-channel version with L0 chip.
Histeresis edit added.
PX815-3 Firmware upgrade
ver.
1.06

Firmware upgrade.
RDM addressing fix.
PX313 device and PxFlasher software required.
PX815-2-L0 Firmware upgrade
ver.
1.07

Firmware upgrade for 2-channel version with L0 chip.
Histeresis edit added.
PX815-2 Firmware upgrade
ver.
1.06

Firmware upgrade.
RDM addressing fix.
PX313 device and PxFlasher software required.
PX789 Firmware upgrade
ver.
1.02

Firmware upgrade.
Restore default setting fix.
PX313 device and PxFlasher software required.
⁙
1.01
Firmware upgrade.
PX313 device and PxFlasher software required.
PX788 Firmware upgrade
ver.
2.1.0

Firmware upgrade
  • The DMX input has been made immune to packets with different numbers of channels.
⁙
2.0.0
Firmware upgrade:
  • DMX input stability improved,
  • new "Direct" mode added,
  • DMX output response to input signal loss added,
  • input porting capability added,
  • PIN code for display and Web Server added,
  • APIPA support for DHCP added,
  • Web Server graphic improvements
1.0.0
Firmware upgrade
PX787 Firmware upgrade
ver.
4.0.0

  • Improved operation for DT8 Tunable White,
  • Added the ability to send commands cyclically to the DALI line,
  • Changed interface appearance.
⁙
3.0.0
Software update.
Attention! Before performing the update, you must export the device configuration. Once the update has been performed, it can be imported to maintain compatibility. Description of changes:
  • Added support for Tunable White DT8 ballasts,
  • Added option for linear control of Dali ballasts,
  • Added DALI line testing mode from the LCD display,
  • Added APIPA support for DHCP,
  • Added pin code for display and Web Server,
  • The stability of the Web Server has been improved.
2.8.1
Firmware update:
  • system stability improved,
  • extended waiting time for DHCP responses,
  • additional diagnostic data.
2.7.0
Firmware update:
  • forced converting after power on.
2.6.0
Firmware update:
  • fixed screen freezing problem,
  • added DALI frame priority setting.
2.5.0
Firmware update - fixed crash problem when sending commands to the DALI line.
2.4.0
Configuration import and export improved.
2.3.0
  • Better support for DALI-2 ballasts,
  • GUI improvements,
  • Fixed LCD issues,
  • Added option to remove all adresses from ballast,
  • Reliability improved.
2.0.0
Software update Note! Read the manual before updating.
  • Saving device configuration improved (device restart is not required - except for network configuration).
  • Support for input buttons in devices from serial number 21030041 - triggering defined actions for the DALI line.
  • Extended display menu and improved web interface.
  • "Extended Fade Time" support added according to EN 62386-102: 2014.
  • Stability fixes.
PX786 firmware upgrade
ver.
1.15

Improved performance
⁙
1.11
  • Support for sACN protocol.
  • Network settings fix.
1.09
  • Artnet protocol fixes,
  • changes to the default configuration.
1.08
Firmware upgrade.
"DMX Stop" option fix.
PX785 firmware upgrade
ver.
1.15

Improved performance
⁙
1.11
  • Support for sACN protocol.
  • Network settings fix.
1.09
  • Artnet protocol fixes,
  • changes to the default configuration.
1.08
Firmware upgrade.
"DMX Stop" option fix
PX763 PX863 Firmware upgrade
ver.
2.15

Firmware upgrade.
Curves support added.
PX313 device and PxFlasher software required.
⁙
2.11
Firmware upgrade.
New operation modes added (RDM personalities).
PX313 device and PxFlasher software required.
PX760 Firmware upgrade
ver.
1.15

Improved performance.
⁙
1.11
Network settings fix.
1.10
Support for the sACN protocol.
1.08
"DMX Stop" option fix
1.07
Long names support
1.06
DMX Workshop support improved
1.05
  • GrandMA2 console compatibility verified,
  • Display contrast adjustments.
PX749 system upgrade
ver.
1.0.0.9

System upgrade
Minor fixes and improvements.
PX745/746/780/781 firmware upgrade
ver.
5.14

Firmware upgrade.
NO SIGNAL "HOLD" option added.
⁙
5.13
Firmware upgrade.
PX313 device and PxFlasher software required.
5.11
RDM compatibility improved.
PX741 Firmware upgrade
ver.
1.04

Firmware upgrade.
PX313 device and PxFlasher software required.
PX725 Firmware upgrade
ver.
00.09

Improved resistance to interference.
PX724 ser.2 Firmware upgrade
ver.
2.15

Upgrade for series 2.xx devices.
Improved performance.
⁙
2.11
Upgrade for series 2.xx devices.
Network settings fix.
PX724 ser.1 Firmware upgrade
ver.
1.15

Upgrade for series 1.xx devices.
Improved performance.
⁙
1.11
Upgrade for series 1.xx devices.
Network settings fix.
1.10
Support for the sACN protocol.
1.08
"DMX Stop" option fix
1.07
Long names support
1.06
DMX Workshop support improved
1.05
GrandMA2 console compatibility verified.
1.01
Firmware upgrade
Supports:
  • ArtNet -> DMX-RDM
  • DMX -> ArtNet
PX716 Firmware upgrade
ver.
1.13

Improved compatibility with very fast DMX.
⁙
1.12
Firmware upgrade - improved stability
PX714/715/782/783 firmware upgrade
ver.
5.14

Firmware upgrade.
NO SIGNAL "HOLD" option added.
⁙
5.13
Firmware upgrade.
PX313 device and PxFlasher software required.
5.11
RDM compatibility improved.
PX713 Firmware upgrade
ver.
1.10

Firmware upgrade:
  • effect control mode added,
  • enhanced configuration options.
PX710S+ Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • added PX710S compatibility with PX710M+,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • improved display of sunrise and sunset times on the display,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
PX710S Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • added PX710S compatibility with PX710M+,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
02.01.00.30
    Improved cooperation with Modbus TCP Additional UDP commands PXDesigner 1.0.30 version required
02.01.00.26
  • UDP communication optimized
  • PxDesigner 1.0.27 version required.
02.01.00.23
  • DMX output characteristics calculation added in live mode,
  • Improved stability of SPI communication,
  • Extended error information,
  • PxDesigner 1.0.26 version required.
02.01.00.12
  • Function "Write Multiple Registers" for Modbus TCP improved.
  • PxDesigner: 01.00.22 version required.
02.01.00.11
  • Added new commands in TCP communication.
  • Improved shows support.
  • PxDesigner: 01.00.20 version required.
02.01.00.10
Added new commands in UDP communication.
PxDesigner: 01.00.20 version required.
02.01.00.09
  • improved interference resistance
  • added saving log files. Required version of PxDesigner: 01.00.18.
02.01.00.07
Changes in status and group support.
Required PxDesigner 01.00.16 version.
01.00.00.09
Firmware upgrade - new merge mode - "average"
01.00.00.08
Firmware upgrade - fixed master of mask
01.00.00.06
Firmware upgrade - Fixed DMX stability during initialization
01.00.00.03
Firmware upgrade
  • External inputs system support (PX723, PX725, PX734)
  • PID controllers
  • Minor bug fixes and additional features
  • PxDesigner 1.0.10 required
00.01.00.16
Small fixes
00.01.00.13
PX345 Firmware upgrade. New features:
  • PX723 and PX734 external inputs support
  • Additional Modbus functions
PX710M+ Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • added PX710S compatibility with PX710M+,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • improved display of sunrise and sunset times on the display,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
PX710M Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • added PX710S compatibility with PX710M+,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
02.01.00.30
    Improved cooperation with Modbus TCP Additional UDP commands PXDesigner 1.0.30 version required
02.01.00.26
  • UDP communication optimized
  • PxDesigner 1.0.27 version required.
02.01.00.23
  • DMX output characteristics calculation added in live mode,
  • Improved stability of SPI communication,
  • Extended error information,
  • PxDesigner 1.0.26 version required.
02.01.00.12
  • Function "Write Multiple Registers" for Modbus TCP improved.
  • PxDesigner: 01.00.22 version required.
02.01.00.11
  • Added new commands in TCP communication.
  • Improved shows support.
  • PxDesigner: 01.00.20 version required.
02.01.00.10
Added new commands in UDP communication.
PxDesigner: 01.00.20 version required.
02.01.00.09
  • improved interference resistance
  • added saving log files. Required version of PxDesigner: 01.00.18.
02.01.00.07
Changes in status and group support.
Required PxDesigner 01.00.16 version.
01.00.00.09
Firmware upgrade - new merge mode - "average"
01.00.00.08
Firmware upgrade - fixed master of mask
01.00.00.06
Firmware upgrade - Fixed DMX stability during initialization
01.00.00.03
Firmware upgrade
  • External inputs system support (PX723, PX725, PX734)
  • PID controllers
  • Minor bug fixes and additional features
  • PxDesigner 1.0.10 required
00.01.00.16
Small fixes
00.01.00.13
PX345 Firmware upgrade. New features:
  • PX723 and PX734 external inputs support
  • Additional Modbus functions
PX703 old system upgrade 1.0.1.17
ver.
1.0.1.17

Software update for the system version 0.x.x, necessary to update to the system version 1.x.x.x. Also download version 0.1.113 and follow the user manual.
PX703 old system upgrade 0.1.113
ver.
0.1.113

Software update for the system version 0.x.x, necessary to update to the system version 1.x.x.x. Also download version 1.0.1.17 and follow the user manual.
PX703 Firmware upgrade
ver.
1.5.25

Firmware upgrade for system versions from 1.x.x up.
Package contains system upgrade to version 1.0.1.55 and application upgrade to version 1.5.25.
  • added support for graphical versions of configuration,
  • added widget Timer and Log Book,
  • improved communication with drivers
  • other small improvements,
  • requirements PXDesigner version 1.1.0.
  • requirements driver firmware version 02.02.00.13.
⁙
1.2.3
Firmware upgrade.
"Refresh" button added on main screen.
1.2.1
Firmware upgrade.
Master and speed sliders refreshing improved.
PX385 Firmware upgrade
ver.
2.12

Firmware upgrade.
PX313 device and PxFlasher software required.
PX376 Firmware upgrade
ver.
4.0.4

Firmware update.
Only for devices with version 3.40.2 or higher.
  • Disabled resolution auto negotiation during start. Default resolution Full HD (1920x1080)
  • Disabled undervoltage warning.
⁙
4.0.3
Firmware update.
Only for devices with version 3.40.002 or higher.
  • improvments for new hardware version
4.0.2
Firmware update.
Only for devices with version 3.40.002 or higher.
  • DMX addressing fixed.
4.0.0
Firmware update.
Only for devices with version 3.40.002 or higher.
  • firmware update via USB,
  • improved file transfer via FTP.
PX376 DMX upgrade
ver.
1.03

Firmware upgrade.
PX313 device and PxFlasher software required.
PX370 upgrade
ver.
6.00

Firmware upgrade.
Improved control characteristics.
⁙
5.14
Firmware upgrade.
NO SIGNAL "HOLD" option added.
5.13
Firmware upgrade.
PX313 device and PxFlasher software required.
5.11
RDM compatibility improved.
5.09
Firmware upgrade - new control mode, improved strobo effect
PX359 Firmware upgrade
ver.
1.5.0

Software upgrade - added function enabling test sending of RS232 commands from the web interface.
⁙
1.4.0
Software upgrade - RS232 ports configuration improved.
1.3.0
Software upgrade - adding more than one command to single DMX channel.
1.1.1
Software update - corrected descriptions of RS232 ports.
PX357+ ser.2 Firmware upgrade
ver.
2.15

Upgrade for series 2.xx devices.
Improved performance.
⁙
2.11
Upgrade for series 2.xx devices.
Network settings fix.
2.09
Upgrade for series 2.xx devices
  • Artnet protocol fixes,
  • changes to the default configuration.
2.08
"DMX Stop" option fix
PX357+ ser.1 Firmware upgrade
ver.
1.15

Upgrade for series 1.xx devices.
Improved performance.
⁙
1.11
Upgrade for series 1.xx devices.
Network settings fix.
1.09
Upgrade for series 1.xx devices
  • Artnet protocol fixes,
  • changes to the default configuration.
1.08
"DMX Stop" option fix
1.07
Long names support
1.06
DMX Workshop support improved
1.05
GrandMA2 console compatibility verified.
PX357 Firmware upgrade
ver.
1.03

Firmware upgrade - performance improvement
PX349 Firmware upgrade
ver.
1.13

Improved compatibility with very fast DMX.
⁙
1.12
Firmware upgrade - improved stability
PX348 Firmware upgrade
ver.
1.29

Software update:
  • Fixed volume settings after restart.
⁙
1.28
Firmware upgrade:
  • Playlists support (1 main and 8 folders)
  • Shuffle mode
  • Increased song limit(up to 255 per playlist)
  • SD card support improved.
  • Automatic track selection on power up
  • Automatic selection of the first existing file.
  • fixes for shuffle play mode,
  • fixes for refreshing NOS settings.
PX345+ Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • improved display of sunrise and sunset times on the display,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
02.01.00.30
    Improved cooperation with Modbus TCP Additional UDP commands PXDesigner 1.0.30 version required
PX345 Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
02.01.00.30
    Improved cooperation with Modbus TCP Additional UDP commands PXDesigner 1.0.30 version required
02.01.00.26
  • UDP communication optimized
  • PxDesigner 1.0.27 version required.
02.01.00.23
  • DMX output characteristics calculation added in live mode,
  • Improved stability of SPI communication,
  • Extended error information,
  • PxDesigner 1.0.26 version required.
02.01.00.12
  • Function "Write Multiple Registers" for Modbus TCP improved.
  • PxDesigner: 01.00.22 version required.
02.01.00.11
  • Added new commands in TCP communication.
  • Improved shows support.
  • PxDesigner: 01.00.20 version required.
02.01.00.10
Added new commands in UDP communication.
PxDesigner: 01.00.20 version required.
02.01.00.09
  • improved interference resistance
  • added saving log files. Required version of PxDesigner: 01.00.18.
02.01.00.07
Changes in status and group support.
Required PxDesigner 01.00.16 version.
01.00.00.09
Firmware upgrade - new merge mode - "average"
01.00.00.08
Firmware upgrade - fixed master of mask
01.00.00.06
Firmware upgrade - Fixed DMX stability during initialization
01.00.00.03
Firmware upgrade
  • Minor bug fixes and additional features
  • PxDesigner 1.0.10 required
00.01.00.16
Small fixes
00.01.00.14
PX345 Firmware upgrade. New features:
  • Additional Modbus functions
00.00.00.92
Firmware upgrade
PX340+ Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • improved display of sunrise and sunset times on the display,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
02.01.00.30
Firmware upgrade:
    Improved cooperation with Modbus TCP Additional UDP commands PXDesigner 1.0.30 version required
PX340 Firmware upgrade
ver.
02.02.00.13

  • added support for subscription communication,
  • added support for new commands,
  • improved playback of shows (up to 8 at the same time),
  • added the ability to go to a specific level for SET MASTER action,
  • added smoothing between MASTER changes for output channels,
  • PXDesigner 1.1.0 version required.
⁙
02.01.00.45
  • fixed master for masks,
  • PXDesigner 1.0.37 version required.
02.01.00.44
  • fixed a problem with recording shows,
  • PXDesigner 1.0.35 version required.
02.01.00.32
    The PX710 + family has been added Fixed minor bugs with displaying information in the controller preview PXDesigner 1.0.32 version required
02.01.00.30
    Improved cooperation with Modbus TCP Additional UDP commands PXDesigner 1.0.30 version required
02.01.00.26
  • UDP communication optimized
  • PxDesigner 1.0.27 version required.
02.01.00.23
  • DMX output characteristics calculation added in live mode,
  • Improved stability of SPI communication,
  • Extended error information,
  • PxDesigner 1.0.26 version required.
02.01.00.12
  • Function "Write Multiple Registers" for Modbus TCP improved.
  • PxDesigner: 01.00.22 version required.
02.01.00.11
  • Added new commands in TCP communication.
  • Improved shows support.
  • PxDesigner: 01.00.20 version required.
02.01.00.10
Added new commands in UDP communication.
PxDesigner: 01.00.20 version required.
02.01.00.09
  • improved interference resistance
  • added saving log files. Required version of PxDesigner: 01.00.18.
02.01.00.07
Changes in status and group support.
Required PxDesigner 01.00.16 version.
01.00.00.09
Firmware upgrade - new merge mode - "average"
01.00.00.08
Firmware upgrade - fixed master of mask
01.00.00.06
Firmware upgrade - Fixed DMX stability during initialization
01.00.00.03
Firmware upgrade
  • External inputs system support (PX723, PX725, PX734)
  • PID controllers
  • Minor bug fixes and additional features
  • PxDesigner 1.0.10 required
00.01.00.16
PX181 Touch Panel support improoved
00.01.00.13
PX340 Firmware upgrade. New features:
  • PX723 and PX734 external inputs support
  • Additional Modbus functions
00.00.00.92
Firmware upgrade
PX333 upgrade
ver.
2.10

Firmware upgrade.
ON/OFF channels fixed.
⁙
2.08
Firmware upgrade
PX308 upgrade
ver.
2.07

Firmware upgrade - new control mode, improved strobo effect
PX307 upgrade
ver.
2.07

Firmware upgrade - new control mode, improved strobo effect
PX305 upgrade
ver.
2.07

Firmware upgrade - new control mode, improved strobo effect
PX300 driver
ver.
1.0

USB driver
PX292-L0 Firmware upgrade
ver.
1.02

Added output values ​​preview menu.
PX292 Firmware upgrade
ver.
2.09

  • Added output values ​​preview menu,
  • Fixed bug in scene selection menu in noSignal mode.
⁙
2.07
DMX patching fixed
2.05
Firmware upgrade
  • New DMX receiver
  • New ADC addressing
PX282 upgrade
ver.
3.11

Firmware upgrade.
PX313 device and PxFlasher software required.
⁙
3.10
Firmware upgrade.
3.09
New characteristics added:
  • linear
  • DALI
3.04
Firmware upgrade - new control mode, improved strobo effect
PX277 upgrade
ver.
2.09

KEYBOARD_MODE support
⁙
2.07
Firmware upgrade.
PX268 Firmware upgrade
ver.
3.00

Firmware upgrade.
PX313 device and PxFlasher software required.
PX257 Firmware upgrade
ver.
2.12

DMX reception enhanced.
PX255 Firmware upgrade
ver.
3.01

Firmware upgrade - fixed virtual ballast addressing
PX254 upgrade
ver.
5.14

Firmware upgrade.
NO SIGNAL "HOLD" option added.
⁙
5.13
Firmware upgrade.
PX313 device and PxFlasher software required.
5.11
RDM compatibility improved.
2.13
DMX receiver improved
2.10
Improved 3bS (3B + SHUTTER) control mode.
2.07
Firmware upgrade - new control mode, improved strobo effect
PX249 upgrade
ver.
1.29

Software update:
  • Fixed volume settings after restart.
⁙
1.28
Firmware upgrade:
  • fixes for shuffle play mode,
  • fixes for refreshing NOS settings.
1.24
Automatic selection of the first existing file.
1.23
Automatic track selection on power up
1.21
SD card support improved.
1.20
New functions:
  • Playlists support (1 main and 8 folders)
  • Shuffle mode
  • Increased song limit(up to 255 per playlist)
1.17
Firmware upgrade.
Performance optimization
1.14
Firmware upgrade
Single playlist mode fixed
1.13
Firmware upgrade - additional memory security
PX245 upgrade
ver.
3.03

Firmware upgrade.
⁙
3.02
Firmware update for PX245
PX241 upgrade
ver.
5.09

Firmware upgrade - new control mode, improved strobo effect
PX235 Firmware
ver.
3.06

Firmware upgrade for devices version 3.00 and higher.
⁙
3.05
Firmware upgrade.
1.08
Firmware upgrade - fixing patching error.
PX227-L0 Firmware upgrade
ver.
1.02

Added output values ​​preview menu.
PX227 Firmware upgrade
ver.
2.09

  • Added output values ​​preview menu,
  • Fixed bug in scene selection menu in noSignal mode.
⁙
2.07
DMX patching fixed
2.05
Firmware upgrade
  • New DMX receiver
  • New ADC addressing
PX218 upgrade
ver.
1.04

Firmware upgrade - Windows 10 support (works with software from version 1.7)
PX215 upgrade
ver.
5.09

Firmware upgrade - new control mode, improved strobo effect
PX211 upgrade
ver.
5.09

Firmware upgrade - new control mode, improved strobo effect
Px186 Firmware
ver.
1.09

Firmware upgrade - added option DMX input smooth
PX184 upgrade
ver.
5.09

Firmware upgrade - new control mode, improved strobo effect
PX181 upgrade
ver.
6 Apr 2014

Firmware upgrade
PX178 firmware
ver.
2.08

Firmware upgrade.
⁙
2.07
Firmware upgrade
PX163+ Firmware upgrade
ver.
2.15

Firmware upgrade.
Curves support added.
PX313 device and PxFlasher software required.
⁙
2.09
Firmware upgrade.
PX313 device and PxFlasher software required.
2.05
Firmware upgrade
  • CPU temperature measurement
  • New functions:
    • 48ch+dimmer control mode
    • factory defaults
    • white balance
    • No Signal -> Hold
PX145+ upgrade
ver.
4.02.0005

Firmware upgrade - timer events improvement
PX145 firmware
ver.
3.04.00005

Firmware upgrade
PX140+ upgrade
ver.
4.02.0005

Firmware upgrade - timer events improvement
PX140 firmware upgrade
ver.
3.04.0006

Firmware upgrade - improved communication with PX181
PX102 Library
ver.
4.01

Library for PX102 software
PX102 Firmware
ver.
2.05

Firmware upgrade - english version.
FacebookFacebook InstagramInstagram YouTubeYouTube LinkedInLinkedIn